49 Rodgers Street
Yarram 3971
Victoria
Australia
Tel (03) 5182 0666 Fax (03) 5182 0667 Email Us
POTTINGER MOWERS
DISC disc-type
mowers
Pöttinger NOVADISC disc-type
mowers
Unbelievably low drag
resistance
With the new NOVADISC mower the
grassland specialist Pöttinger has developed a new product that
will lift the mowing technology market.
This lightweight mower is smooth-running and tuned for high
performance.
Welded cutter bar as on the proven
NOVA range.
Fast knife
change
Smooth-running belt
drive.
Cutter bar transmission behind the
first mower disc - no inside shoe, no risk of
clogging.
Solid welded design for high
loading capacity enables overall sleek
design.
No problems on smaller patches of
ground or on hilly terrain.
No clogging, even when passing
over mown crop.
Freewheel as
standard
Breakaway system – convenient and
reliable
This system is fitted as standard
and features a mechanical breakaway device that unlatches on impact
and engages again when the rig is reversed. Protection and comfort
hand-in-hand.
Counter springs – ground care mowing
The pressure on the ground can be
adjusted steplessly by changing the mounting height above the
tractor hitch.
The optimised position of the
countersprings guarantees best possible weight alleviation of the
cutter bar. A uniform pressure is maintained even in extreme
operating conditions such as on embankments (up to 45° upwards or
30° downwards).In addition there is an adjustable spring on the
boom for unique overall weight alleviation. (except on NOVADISC
400).
Working position – DISC lifting system
The tractor hitch does not need to
be operated for lifting the mower at headlands. As a result no
readjustment is required after lowering. Simply move the remote to
the set height.
The mower is lowered so that the outside contacts the ground
slightly before the inside to protect the sward.
The latest side-mounted technology
Headstock with adjustable lower
links - can be matched to any track width of
tractor.
Paddle drums at both ends provide
best swath placement and tidy crop flow, even on a
slope.
Especially narrow swath formation
if required with swath discs (optional).
Transmission with no inside
shoe
NOVADISC 400 - Sleek and
lightweight
Working width:
3,88 m
The cutter bar
is raised using a double-acting hydraulic cylinder
Transport
height below 4 metres
Optional: two
central conveyor drums allow the swath to be
devided
